Dough divider V 700

BASIC EXECUTION:

2, 3, 4, 4-split, 5, 6, 6-split, 2 and 4, 3 and 6 pocket machine
Dividing unit Ni-Resist with automatic oiling on unit and inner conveyor, 7 fixed and 14 adjustable dosing valves, oil tank 10 litres, with automatic switch off in case of no oil
Voluminator pressure regulator and compensator
Discharge conveyor 500 mm, with quick-lock system, scraper and catch tray with drain plug
Conveyor power plugs on the front of the machine, mounted onto separate mounting plates
Separate drive on in- and outside conveyor with gear motors (split inner conveyors with drum motors) inclusive frequency inverter
Belt lubrication system with stainless steel oil dispensing system which can be taken out and cleaned
Pneumatic discharge flap with scraper (compressed air 250 l/h)
Hopper stainless steel 70 litres, inside Teflon coated, H=1,754 mm
Hopper base Teflon coated
Hopper removable to left or right side
Frequency inverter for variable speed
Operation : Siemens PLC on arm above discharge conveyor with on / off / emergency stop / position stop / Servo weight adjustment / pre-set counter / setting of discharge flap / setting of positioning roller
Servo weight adjustment motor Profinet
Recipe control
Main piston Ni-Resist
Measuring pistons in food safe bronze
Knife made of stainless steel, hardened
Cover plates stainless steel, brushed, with Schmersal RFID safety switches, easy to remove
Doors and covers to reach main chamber and back slide easy accessible for operators, no locks
Frame steel, nickel plated
Crankshaft and drive rods nickel plated cast iron
New position electrical cabinet at left back side

Performance, maximum benefits and modular options

Principle:

The dividing of the desired dough quantity takes place in two stages:
The approximate dough quantity is drawn into the main chamber, after which the exact weight of the dough pieces is being measured in the dividing chamber.

The back slide (dividing chamber) moves vertically and drops the dough pieces vertically on the inner conveyor, after which the dough pieces are being taken over by the discharge conveyor.

Because the dough quantity in the main chamber is nearly the same as the total dough dividing quantity, the whole dividing process takes place in a very dough friendly manner.

Product quality
- Dough friendly dividing with hydraulic adjustable pressure compensator and regulator
- Accurate dividing of soft doughs with long bulk fermentation
Daily use
- High weight accuracy
- Robust design
- Large weight range
- Frame out of rectangular, nickel plated tubular profiles for easy access
- Hygienic design, round bars for lubrication system main chamber and back slide. New mounting system for ejection scraper for easier serviceability, hygienic designed feet, hygienic design covers.
- No lubrication components above pneumatic components to prevent oil dripping on pneumatic components
- New position of electrical cabinet means direct access to crankshaft on the front
- Easy accessibility of the conveyor power plugs (robust HAN 6 and moved out of food zone) on the front and the separate mounting plate to prevent from oil dripping
- Set of 2 oil catch pans which can be taken out at the front and back side or combined at 1 side
- Open front design for visual control on discharge conveyor side
- Synthetic conveyor belt with quick-lock system
- Easily removable stainless steel dough hopper, Teflon coated
- Control of all adjustments by colour touch screen
- Wear-resistant dividing system with dividing unit in Ni-Resist
- Solid construction of drive system and dividing mechanism
- High pressure oiling system, for minimum use of oil
Cleaning
- Hygienic design
- Dough zone is separated from the electric cables
- Self-cleaning knife

Hourly capacity:

max. 9,600 pcs/h

Technical details:

2, 3, 4, 4-split, 5, 6, 6-split,
2 and 4, 3 and 6 pocket machine

Per V 700 type:

Partitions:
2: 25 / 50 mm
3: 25 mm
4: 25 mm
4-split: 2 x L / 2 x R – 25 mm
5: 25 mm
6: 25 mm
6-split: 3 x L / 3 x R – 25 mm
2/4: 25 mm
3/6: 25 mm

Weight range:
2: 400 – 2,400 / 400 – 2,100 gr
3: 300 – 1,400 gr
4: 200 – 1,000 gr
4-split: 150 – 1,000 gr
5: 150 – 780 gr
6: 150 – 600 gr
6-split: 150 – 600 gr
2/4: 400 – 2,150 / 200 – 925 gr
3/6: 300 – 1,300 / 150 – 520 gr

Capacity:
2: 1,000 – 3,000 pcs/h
3: 1,500 – 4,500 pcs/h
4: 2,000 – 6,000 pcs/h
4-split: 2,000 – 6,000 pcs/h
5: 2,500 – 7,500 pcs/h
6: 3,000 – 9,000 pcs/h
6-split: 3,000 – 9,000 pcs/h
2/4: 1,000 – 3,000 / 2,000 – 6,000 pcs/h
3/6: 1,500 – 4,500 / 3,000 – 9,000 pcs/h

Dimensions (lxwxh):

1,950 mm x 1,800 mm x 1,760 mm

Connected load:

230/400 V, 3 phase, 50 Hz + earth, KVA depending on options
Pneumatic connection required

Weight:

Net: 1,550 kg, Gross: 1,720 kg

Shipping volume:

3,7 m³

Options

Hopper stainless steel 120 litres, inside Teflon coated, H=1,884 mm
Hopper stainless steel 160 litres, inside Teflon coated, H=1,966 mm
Hopper stainless steel 250 litres, inside Teflon coated, H=2,080 mm
Hopper inside HDPE material
Hopper base Nedox coated (NOT possible in combination with SR unit)
Hopper base ceramic coated (in combination with SR unit)
Oiling on hopper including oil shortage signalisation (compressed air 400 l/h)
Flour duster with own drive motor
Drag-net on discharge conveyor, as from L=700 mm
Moveable oil catch tray under machine
CleanTec version: S(our) R(estistant) unit, Combined inner and discharge conveyor on one moveable frame, Moveable oil catch tray, Pneumatics in a shielded box, Bearing housings with corrosion protection coating
Dividing unit in SR material with 25 mm partitions (other size partitions on request)
Lifting device knife and main piston
Increasing the machine with 100 mm. Additional set for extra machine (B/V 700 until 2018, B/V 700 as from 2019 or V/TM 900)
Blue Box V 700

Please send me more information:

"*" geeft vereiste velden aan

Dough divider
V 700

Suitable for all common dough types

Pressure compensator

Hopper

BASIC EXECUTION:

Performance, maximum benefits and modular options

Data sheet

Please send me more information: